OTHERS
MATERIAL
TENSILE STRENGHT
Rm (N/mm2)
YIELD STRENGHT
Rm (N/mm2)
ELONGATION

% (A5)
HARDNESS
HB100
(BRƯNELL)

ELASTIC MODULU
Rm (N/mm2)

DENSITY
(g/cm3)
SPECIFIC HEAT
(l/g.k)
APPLICATIONS
SnBz10
275-295
150-160
20
60-75
98.066
8,9
0,16
 This material used for gears. It has a very good repture strenght and corrosion resistance.
SnBz12
275-315
160-170
15
95-105
93.160
8,9
0,14
 SnBz12 has a high hardness and suitable to work under heavy loads. It has a good corrosion resistance aganist sea water.
SnBz14
245-295
170-190
5
85-115
90.220
8,9
0,11
 SnBz14 used as wearing plates.
Rg5
235-295
100-120
18-25
65-75
93.160
8,8
0,17
 This materials has a good hardness and resistance to sea water. It is espacially recomended where low wall thickness required.
Rg7
255-295
115-135
18-20
75-85
91.200
8,8
0,16
 It has a good resistance to friction and used as wearing plates under heavy loads.
Rg10
275-295
135-185
10-15
80-90
90.220
8,8
0,13
 This material has a high hardness and has a good corrosion resistance aganist sea water.
SnPbBz5
235-295
135-165
12-18
85-90
85.315
8,9
0,14
 SnPbBz5 possesses a good hardness with very low sliding friction coefficient and good sliding properties. It has a good resistance against all acids.
SnPbBz10
225-255
115-145
10-14
75-85
83.355
9
0,13
 It has a very good resistance to wear and corrosion. This material used in hot and cold rolling
SnPbBz15
215-235
105-145
12-15
70-75
80.400
9,1
0,15
 This material posseses a lower hardness with high sliding properties.
SnPbBz20
195
100-135
10
55-58
78.450
9,2
0,17
 This material has a very good slinding properties and resistance to Sulphuric Acid.
MN-BRONZES
344
188
12
200-220
7,83
0,37

This alloy used in ship building industry, machine manufacturing industry, chemical plants as propellers, gears, bushing, hydrolic cylider pieces.
CuTe
260
200
8
85
12
8,9
0,38
 Used as electrical connectors, motor pieces, plasma torch tips.